PATENT­ED FIN­STER­WALDER LEATHER SKIM­MERS SYS­TEM – con­tin­u­ous­ly remove float­ing con­t­a­m­i­nants from the fer­menter and sep­a­rate them!

The skim­mer sys­tem is used for the con­tin­u­ous dis­charge of float­ing sub­stances from a fer­menter / con­tain­er. The sys­tem con­sists of the patent­ed skim­mer and a stan­dard screw separator.

Tech­ni­cal specifications

• Skim­ming mate­ri­als (films, fiber mate­r­i­al, etc.) from the liq­uid surface
• Pre­ven­tion of float­ing ceilings
• Instal­la­tion on top (LS01) or mount­ing from the side (LS02)
• Design-relat­ed gas-tight in every oper­at­ing condition

TECH­NI­CAL SPEC­I­FI­CA­TIONS for the skim­mer LS01

• Instal­la­tion sit­u­a­tion – instal­la­tion fer­menter ceiling
• Instal­la­tion dimen­sions – open­ing 1100 x 1200 mm
• Weight (emp­ty) – 170 kg
• Pres­sure con­nec­tion – DN 100 / PN 16
• Con­nect­ed load – 7 kW, 50 Hz; 380-420 V
• Ex zones – II2G EEx d ib IIB T4

TECH­NI­CAL SPEC­I­FI­CA­TIONS for the skim­mer LS02

• Instal­la­tion sit­u­a­tion – Side mounting
• Instal­la­tion dimen­sions – Inci­sion 370 x 530 mm
• Weight (emp­ty) – 360 kg
• Pres­sure con­nec­tion – DN 100 / PN 16
• Con­nect­ed load – 7 kW, 50 Hz; 380-420 V
• Ex zones – II2G EEx d ib IIB T4